Zone Alarm Firewall

Factual Questions
1

I have Zone Alarm Version 5.5.094.000 with Win98ME installed,
i was wondering why in the Firewall tab/Zones i have four entrys
Name PPP Adapter.
Zone Internet
Entry Type Adapter Subnet
IP Address / Site 0.0.0.0/0.0.0.0
Name PPP Adapter.
Zone Internet
Entry Type Adapter Subnet
IP Address / Site 10.157.65.120/255.0.0.0
Name Microsoft TV/Video Connection
Zone Internet
Entry Type Adapter Subnet
IP Address / Site 5.0.0.0/255.255.255.255
Name Bluetooth PAN Network Adapter NDIS Driver
Zone Internet
Entry Type Adapter Subnet
IP Address / Site 0.0.0.0/0.0.0.0

the Microsoft entry i view as suspicious, why should Zone Alarm assign an IP Adress which i can not edit or delete also the same is true for the other entrys.
Any idea what’s going on, is this a security risk?

2

I think you are misunderstanding the issue. You cannot change IP addresses in ZoneAlarm. Those are a given.

You can go to the device manager and disable any adapters you do not want to use or you can configure them in the network properties.

3

Thanks Sailor,
i was believing that because there are four buttons on that tab, “Add”“Edit”“Remove”“Apply” which when clicked on give a message that i can not manipulate them, anyway i have removed the unwanted entrys in the Devise Manager.