How To Remove Micro Splinters from Your Hands?

Use a needle or a pin.

Use a match and sterilize the needle with the flame from the match.

Then carefully pick away at the skin, (you shouldn’t even feel this 'cause the outer skin is dead) and then you can pick away enough of the skin to use the tweezers or even use the pin/needle to remove it.

Then when finished, take alcohol and clean the area off and then wash it with soap and water for at least one minute. This will go a long way to prevent infection.

Hmmm - true. It might help with the ones that the other methods miss, however.

The hair wax kit thing might do the deed as others have suggested (assuming the splinters stick out enough from the skin for the wax to be able to “grip”). I saw one of those Discovery Health “ER Re-enactment” shows where they did exactly that with a little girl who was covered in cactus spikes (cringe). They wanted to anesthetize her, the parents had lost another child to anesthesia-related complications and refused permission, and someone suggested the hair wax option.

There was an episode of the Travel Channel’s “Bite Me with Dr. Mike” where the foolish host decided to touch an Australian ‘gympie gympie’ tree. Big mistake! The guide had a packet of depilation tape(or super-adhesive bandaid-thing) handy–good thing!–which seemed to help in removing the tiny stinging hairs.

I’ve worked a lot with cactus. You are probably dealing with Glochid (Firefox generated this link. I don’t know how to convert this link to bb code.)

The glue suggestions above are good in my opinion. The pick them out with tools suggestion are not so good in my opinion. I would try super glue myself having been in this position before.

Glochid

I’ve had success with the tape method

I’ve used duct tape successfully.

Ichthammol. You can probably buy it behind the counter at a pharmacy.

Wha? I have touched rubber cement a lot with my fingers. Am I gonna die?

Soak hands in warm water with Epsom salts dissolved into the water. They will fall out on their own.

I pet one of those when I was a kid.

My parents had taken me on my first trip ever. We went to California and I had never seen a cactus before. Had no clue what one was. I saw one of the above and it looked all nice and fuzzy so I petted it.

Not fun. Me screaming with my hand punctured with zillions of little needles in it. My mom had tweezers and sat there with me plucking most of them out for an hour (sadly this thread comes some 35+ years too late).

Without a doubt.

From touching rubber cement? Probably not.

The main risk from the solvents is that they dissolve the oils in your skin and, with prolonged contact, the cell membranes. That leads to dermatitis and premature aging and makes you more prone to absorbing other substances that are more dangerous which can cause infections or poisoning.

Toluene is a suspected carcinogen, and like all potential carcinogens you should limit your contact with it. Incidental contact probably won’t hurt, but painting your hand with the stuff and leaving it for several hours doesn’t seem like good advice.

I wouldn’t try super glue (cyanoacrylate) because it bonds securely to skin. Have you actually used super glue to do this?

Correct. I’ve used it for years. It is an irritant, so slivers, mild infections or other such can be helped with this stuff. It is indeed black and gooey, so a little dab’l do ya, cover with a bandage and leave it on for 24 hours. It is still sold in many pharmacies.

I’ve used this on various cactus stickers. Prickly pear are the worst, as they are so tiny they are hard to see, and trying tweezers will take all day (or night).

I’ve also used duct tape, and it works pretty well most of the time, especially on the palms or fingers, but if it gets on your arms, pulling it off will take all the hair too. No fun.

Splinters are bad news if they get worked in, and so I choose not to rely on half measures and sticky compounds. Pinchy little Swiss Army knife tweezers are uniquely well suited for this vs regular tweezers. Takes about an hour or so with a very strong light to assist. Remove as many as you can with duct tape (it’s only moderately effective) , then go after the embedded ones with the tweezers. Listen to the radio or something in the background. You will be at it for a while. A sterilized needle may be necessary to pull back the skin and expose those cactus spines that have gone all the way into the skin layer .

I read the “Elmer’s Glue” solution in a parenting mag years ago, and have used it numerous times, successfully, since then.

It doesn’t work every time, but you probably already have some laying around (and if you don’t, it’s easily obtainable), and it’s painless.

I’d try this first.

There’s a link to the BB code in the bottom left corner of each thread. If you want to practice, that’s one reason why we have ATMB. If you want to just make your post without practicing, hit the “Go Advanced” button instead of the “Post Quick Reply”, and you’ll preview your post…and you can click on any links you’ve made to see if they work correctly.

Also, I edited your post to make a link that works on the SDMB. I didn’t change the content otherwise.

Lynn
For the Straight Dope

The person whose grandma had black drawing salve had what is known as Coal Tar salve, and it can be purchased over the counter as a produce called "BoilEase (it draws the junk out of a boil but I bet it’d work for cactus. It works on splinters for sure…)

I know i will receive some flack about this reply, but it works. spread some SuperGlue over the affected finger tip , the after its dry peal the glue off. It will take a bit of skin with it. but it might just take the micro splinter along with it.:stuck_out_tongue:

zombie or no

amputation would also work.

there are plenty of harmless solutions discussed above that are effective using common household items.

superglue is a risky substance to use even for its intended purpose. it is easy to cause damage to your body and unintended objects if used in an unapproved manner.