Since we’re taking about faucets, my kitchen sink has one of those retractable spray heads that comes out on a hose. The hose is very worn and basically that function is useless because it never goes back in the housing. I like the other sink features, including a hot water dispenser.
Is this something I’d have to pay someone to replace? Would I have to replace all the fixtures or just the faucet? Or just the hose itself? No idea how old it is. We just moved this summer and it came with the house.
The hose is probably replaceable. Some are proprietary, others are generic. You discovering the brand and model would be a great help in your efforts.
What exactly does this mean:
Does it not self-retract, can you not push the hose back up in the gooseneck, does the nozzle not fit properly into the housing like they’re mismatched parts, is the nozzle and housing all corroded and nasty w lime scale hanging off it so the various bumps and notches don’t quite mate, etc., etc., etc.?
There are a lot of ways for that not to work and each distinct problem has a distinct solution.
The hose itself seems to have taken so much external damage that it’s not sliding back smoothly, it’s quite difficult but not impossible to push it back up. I don’t think it’s a compatibility issue, I just think the damaged hose is creating too much friction for it to slide back.
I’ll check the brand. And I’ll double check the issue.
Typically those hoses are long enough to form a large half-loop under the sink beneath the gooseneck. And typically there’s a lead weight about the size of a large tangerine or a bit bigger that’s clamped to the hose.
The weight is positioned so the hose can be pulled out a good length (18-24") before the weight is pulled up against the base of the gooseneck and prevents further extension. In the other direction the weight is what provides the force to retract the hose. And when the nozzle is fully seated back into the gooseneck, the weight should still be above the start of the bottom half-loop so it’s still exerting its full pulling force straight downwards.
If the weight is missing, or the loop is obstructed by too much household crap pushed too far back under the sink, the whole thing won’t work. The loop has to be free to extend and retract without getting wrapped up in plumbing or boxes of dishwasher soap or a pile of rags or an old bucket or …
Maybe you’ll get lucky and this will be a very easy fix.
It is so LOUD here at Casa Del Shoe today. They’re still tearing up the whole street mere feet away from my driveway - the entire intersection has been blocked for weeks, forcing weird detour routes even as other streets are also closed for repairs - and today featured more window-rattling ka-BOOMs plus endless beeping. It’s a friggin’ who’s who of heavy-duty yellow CAT equipment of all shapes & sizes out there.
… and now my next-door neighbor has decided to fire up the ol’ lawn mower. Earlier someone had a big, noisy leaf blower going for ages - the lots here aren’t that big, are you leaf-blowing the entire grounds of Buckingham Palace or something?
Latest fire to put out is a grant budget issue. All these revision materials are due to the federal government on Monday, and it’s all coming down to last minute seat-of-the-pants bullshit. Nobody’s fault, but I don’t need surprises this late in the game.
We ran into a similar thing when we were in Inverness Scotland back in September, although it wasn’t Uber. My wife was trying to get us an Uber to take us to the train station the morning we were leaving, but there were no cars available. So she tried to get a cab and booked something through some scammy website that had an easy to miss “I agree to pay £30 a month for a concierge service subscription” checkbox. Not only did we get charged for a cab that never showed up, but a month later my CC bank flagged a suspicious transaction out of Ireland. Luckily it was easy to go to their website and cancel the “subscription” but it was still annoying and inconvenient while our CC was in limbo for a few days.
The bad: the beeping, rattling, and KABOOMS started up at 7 a.m. sharp. For someone who routinely doesn’t get off work until 1 a.m. this was …an unwelcome development.
The good: some of the noise appears to involve the various heavy machinery forming a parade of sorts, and heading a few feet up the street, so I’m hoping that means they’re wrapping shit up.
My neighbour has torn down a lovely, 116-year-old house to build a duplex. Sad, but par for the course here. In the process they have damaged two neighbouring properties (one fixed, because the homeowner is smart and sicced her insurance company on them; one not fixed, because the owner is an 87-year-old man in the hospital). Today, once again, they are blocking the entire street because it’s convenient for them, but can’t be bothered to get the proper permits and close the road.
When I complained, because I was surprised to find the road to my house blocked, I was told that “people like me” are the problem, and they’re not doing anything wrong, because (basically) people can go around the block. I called the city, but at worst they’ll get a ticket (cost of doing business), and probably they’ll get a talking-to, which they’ll ignore.
They’ll finish the shoddily-constructed house and sell it to someone before the end of next year, so these won’t be permanent neighbours, but man are they bad people.
I had a leaky faucet in my main bathroom and figured out it was the cartridge. Once I identified the model of my faucet, I found it on Amazon cheap. Took maybe 30 minutes to do the whole job. And I swapped out both cartridges (hot and cold) because it was sold as a 2 pack. The hardest part was just figuring out what model I had.
I do IT for a living, not plumbing, so I’m very much an amateur, but it wasn’t a big deal at all thanks to the internet being able to show you how to do stuff.
I have no idea why this comes to mind, but when my dad sold the family home, he had failed to complete a review of the property line with our neighbor. My dad’s survey was different than the neighbor’s (and worse for all parties) but dad’s lawyer just hadn’t gotten around to getting the matter legally settled to everyone’s satisfaction.
When people came to look at the house, there was a 4x8 sheet of plywood propped up on my neighbor’s property with “PROPERTY LINE DISPUTE” and his phone number spray painted on it.
That was a real hassle for my dad when he was trying to get people interested in buying his property.
I’m not sure why I’m thinking about it, but it would be a real shame if your neighbor has a similar problem.
They’re three doors down from me, but I might mention this to the next-door neighbour. (They damaged the side of her house when demolishing the old house, and rushed over to offer her $100 to replace the damaged plant pots. She was wise enough to see that this might be construed a settlement, and refused, and made them repair ALL the damage.)
There’s a very similar building situation around the corner from us, which does border our property. They wanted to tear down the wall between the properties. The wall ran along two sides of our property, but only one side of theirs, so we assumed the wall was either ours or shared. It turned out that the wall was 100% on their property on that side (and was T-shaped, semi-separating four different properties), but the other leg is about 87% on our property, bordering different neighbours. I’m guessing it was built improperly by whoever owned our house in the 50s.
They built a nine-foot fence (a six-foot fence on top of a three-foot retaining wall), so we won’t be seeing much of them now!
IME everything difficult about replacing a faucet is in the work under the sink. Angle stops that leak. Connections up under there you cannot reach. Nuts that are totally corroded in place. Nuts that need special plumber’s tools to reach. And the baseplate(s) of the new faucet never match the footprint of the baseplate(s) of the old faucet. Meaning you have a mess of exposed grunge and / or virgin unfaded countertop exposed forever right next to your shiny new faucet.
Not to mention the fun of working under the sink on your back in the relative dark. Which gets worse when you get to the age to need glasses for up close vision.
I recall having a plumber replace both bathroom fixtures in a double sink vanity / countertop. It took a pro about 90 minutes per sink because he had to use a big drill and a Sawzall to slowly and carefully shred the old faucets and remove them in chunks; everything was corroded into a solid mass of immovable metal. And all without nicking or breaking the stone countertop.
OTOH, replacing a cartridge is generally:
Turn off the water at the angle stops.
Remove one semi-hidden set screw and pull the handle off.
Remove the one large and easy to access nut that holds the cartridge in place.
Pull the old cartridge straight out. Might need pliers to get it started, then it’s fingers-easy. Might.
Put Vaseline on the new cartridge and gently slide it into place.
Reinstall the nut from step 3.
Reinstall the handle & set screw from step 2
Turn the water on.
If that takes 10 minutes, it’s being done wrong.
Even if the angle stops didn’t fully shut off, whatever water flow that remains running while the cartridge is out ends up on the waterproof countertop and can be easily diverted into the sink. Unlike the case for a full faucet replacement where once you disconnect the feed lines to the faucet the water is running all over the interior of your very much not-waterproof cabinet. That you’re laying in. For many, many minutes.
I did it wrong at first and had a gasket in the wrong place and started spraying water everywhere the first time I tested it. As a reminder:
But it was just a small mess with a bit of water easy to wipe up, and I figured out my screw-up right away. And if I had to do it again, it should go much faster and with fewer problems. Even with my boneheadedness, it wasn’t too bad; it was like changing a light bulb with a few extra steps.
I too have sprayed the room with a mis-installed cartridge. But compared to all the hassle of a full faucet replacement, it’s a trivial and pleasant job.
I’ve swapped out the cartridges on each of the sinks and showers in our house. The hardest part of the job is coming up with the correct swear words to say as you’re trying to get the old cartridge out.