Here’s some things I thought might be useful information for shooters and reloaders:
*there are 7000 grains in a pound of powder
*revolver ammo in heavy calibers needs to have a heavy roll crimp
*pistol ammo requires a good taper crimp
*“pistol” usually refers to a semi-auto handgun
*it is best to start the “sighting-in” procedure of a 'scoped rifle by looking down the bore of your rifle at a target 25 yards away
*do not mix different types of primers or powder
*there are two types of primer systems, Berdan and Boxer; do not attempt to reload Berdan-primed brass
*a bullet dropped at the muzzle of a rifle at the exact moment that an identical bullet is fired from the rifle will hit the ground at the same time the fired bullet hits the ground; this is one of the principles of determining trajectory in the study of ballistics
*a bullet is not designed to “tumble” in flight; aerodynamic stability is lost and accuracy will suffer if a bullet is not flying nose-forward as it moves down-range
I am sure there are lots of things I have neglected to mention in this first post. And I am also sure there are tons of stuff other folks can share in this thread.
I hope this is the correct place for this thread.